|
Good news everyone!
Got the megasquirt 2 ecu swapped in this weekend and she fired right up. Night and day difference. I soldered up the 35 pin AMPseal connector and wired everything to the relay board as a direct plug in swap during a few late nights last week. Yesterday, I took the MS2 and relay board, plugged them in, and I was driving in about 30 minutes. I did have a friend come and rescue me with a jump (too much cranking killed the battery) but other than that she's running pretty well. Still down on power but that's only because she making 5psi (wastegate is turned way down). The ECU is set to max out at 20psi and I can probably go to 25+ psi. I took Lucy on her maiden voyage last night up the mountain to get back home.
-She really wants to go fast, faster, faster still, that's all you got?!...
-BOV is really quiet at low boost
-Tranny is really loud under decel, I'm going to check the fluid level to make sure it's not low
-She corners on rails, pick a line and she'll do it no matter how bad it is
-I'm going to need ear plugs for extended trips, my ears were ringing for an hour after I got home.
-I really need to calibrate the speedo, I'm pretty sure I wasn't doing 160 on the way home last night...
Logs, pictures, videos and the like will be posted as soon as they're uploaded
|