[kdanie]

I have a 30mm Schadek (sp?) from Aircooled.net. Not a big deal to fit. I enlarged the suction hole in the case to match the pump, the support sleeve for the drive tang must be shortend a little to clear the cam and the tang itself may need modification to clear the cam (this depends on the cam/gear you have). I use the Berg cast iron cover with relief and outlet. I blended the cover to smooth the oil entry into the outlet. I eliminated the stock filter mount and use a remote filter/thermostat/cooler and plumb the return oil to the soft plug at the original filter mount, this eliminates several sharp turns in the small passages of the stock filter mount. If you use the Berg outlet/relief cover, be sure to plug the pump to case outlet.
I have to give Jake credit for this modification, I saw it on the STF with pictures quite a while ago. Oliver thinks the stock oil system works fine and this mod. is unncessary, I'm sure stock does work well, but if it can be improved-why not?
ken