Quote:
Originally Posted by coolrydes
I do not understand what you are asking here?
"What is the lb/in rate you guys like to use for these?"
|
When you purchase aftermarket springs that are for no specific application you generally buy based on:
1) Overall diameter
2) Length
3) Spring rate
In North America as far as I've ever seen the spring rate is measured in pounds per inch (lb/in), that is a one inch depression of the spring will be able to resist a specific weight. So, a 180lb/in spring will be able to support 180lbs when depressed one inch, 360lbs for 2 inches of compression, etc. Some springs are wound in such a way that they are progressive, so the more they are compressed the more they actually resist being compressed, but those don't seem to be as commonly used as the one to one lb/in measurement.
Sway bars don't affect the spring rate if both sides are compressed together, but if one is compressed more than the other, the additional spring rate of the torsion bar can be added to that of the actual spring.
Jason