I planned to put a Beesting radio aerial on the roof from a late model VW, but I was worried about future access to the aerial.
On the later VWs it's possible to pull the hood lining down to repair or service the aerial. That's not possible with an old bug, so I came up with the idea making a frame that will sit under the hood lining but will accept a standard Beetle interior light, so if I need to service or replace the aerial I will only need to remove to interior light to gain access to aerial securing nut.
I had a friend make these pieces up to weld into the A&B pillars to give the body some strength. I made a cross brace between the B pillars, a bit like factory cabrios use.
__________________
STI powered 1303 in the works.
|