I'm going a 993 front and rear set up also and I'm also going to have Lanner machine the fronts too.
For the rear I'm going with 944 n/a hubs, the mounting plates for the calipers, and the ebrake hardware. If you put the 944 rear hub, 993 caliper and the 993 disk it will all work together. You will need some small spacers made (about 3mm) to center the caliper on the disk.
__________________
Mike
'04 R32 Tornado Red
'02 New Beetle TDI - Daily driver
'64 Ghia - Project!!-Subaru EJ20T, MS/EDIS, 993 brakes, 914 Tranny...
|