|
Seems ok, but if they're slip-ins that means their cylinder walls are thinner. I'd stay with stock bore, or get at least machine-in's with stock wall width.
You don't want these to warp.
__________________
________________________
1990 Mex-Spec GL Bug "The Blue Flame":
Engine: Planning Stage
Transmission: Planning Stage
Suspension: Front: 3/4 swaybar w/UrethaneBushings, Dropped Spindles. Rear:CB Camber Compensator. Lowered 2 splines
Brakes: Front Brakes: 280mm solid rotors, two pot calipers. Rear: 280mm solid rotors, 1 pot calipers w/ebrake
|