Thank you for all the great comments:-) Wheel center to center is 1580mm. So it is quite wide. But as it is now, the wheels much of the blame for the width. If I had chosen some other wheels BBS or compomotive ET 50 or 60. If I could have managed with my 70mm wideding, as I have. On each side. But now I have to make me some custom fenders 140mm ekstra on each side.
I have a lot of work left before it is ready for startup. And before it is ready for testdrive. When I finished welding everything. I start with a good paint job in the engine compartment. So I stretch all the cooling hoses, electric network. fuel system, etc. So in the spring, should it be ready for some testing