|
Hello Rich,
I have the 944 steel trailing arms (complete with their hubs, axles etc) I mounted on them the 993 turbo discs (dont know their exact difference with the 996 ones) and the only problem was the offset of the bells. In my case I had to machine down on a lathe the inner part of the hub at about 5-6 mm so as the inner part of the disc to fit perfectly above the hand brake brake shoes. After this I had to use a spacer on the outside of the hub to help me keep it tight before the axle nut hits the channeled section. Probably this was the spacer which was mentioned, so in total you gain no added offset for your wheels.
Sorry if I didn;t catch exactly what you ment
JIMP
|