[QUOTE=owdlvr; There is a trick with the shifter to get the stack out, but I'm not sure I totally remember it. I think it was simply put it into neutral first.
Any how, slide the gears tack assembly out of the transmission case, swap the gasket, and slide it back in.
-Dave[/QUOTE]
Hi, I'm in the process of having my tailshaft welded. However I can't remove the intermediate spacer and gears. I can feel it engaged with the side plate. Is there anyone on this sight that has pictures of how to remove the intermediate housing and gears. Dave is correct, in that I will need to put the shafter into some gear. At present I can turn the input shaft and the tail shaft spins, so it is in gear.
I need to have the tailshaft housing welded, but I think I can do it on the cheap.
I plan to go to summit racing for a trans cross member