Quote:
Originally Posted by chug_A_bug
hey... if you are using a T1 then you Need a 200mm flywheel and a autostick/bus Starter and you are going to have to take out the Stud that holds the starter and shave
about 5mm off, then everything Should work. hope that helps
Chris.
|
brilliant!!!
gotit started!!! wooooooooohooooooooo!!!
using a 914/ t25 auto starter......... works a treat!!
ok........... next problem........
i have stock beetle clutch cable with special ends for porsche throw out arm.
when i press clutch, the arm is pulling underneath ok to throw out the bearing but only moves slightly before hitting gearbox case underneath.
it seems to me like i should maybe have a spacer behind the throw out arm, means the release bearing would be closer to the clutch and the arm could travel more underneath........ or else slightly bend the arm, but worried about that one!!
any ideas??