Quote:
|
Originally Posted by oicdn
So, with that said. The stock hubs machined from Vdub increases your offset +2mm per side. I talked to Lanner and he said with the billet hub, it increases it further by +.50 to .60 per side.
It's only a 1.5 inch wheel width increase(and still mantaining a 52mm offset), as even with the billet hub adding 2.6mm of total track width, that's still only 7/64ths of an inch....
So:
Maxx struts + 8.5inch rim = 2in (2.5 at the very most) fender required lol
|
how did you get 2.6mm additional track? is track taken from centerline of the wheel or outside end of the tire?
Think it's taken from outside of the tire, in which case you'd be looking at almost a 5" increase. plus the increase of scrub.