Had another run on the rollers today after I finally got a stable boost regulation working.
She made ....381 Hp at 6650 rpm and 20 psi (1.35bar)
Torque was 456 Nm or about 337 lbs.ft (at 5300 rpm)
No engine problems at all, cool running and drove home again
I wanted to see if the CB hats were lifting at this boost, so I made a small vid of the engine bay during this 20 psi run. Don't see anything moving at all, so thats probably a good thing:
http://www.youtube.com/watch?v=0hf9GfPYoW0