see a 09078 is 19.050 = 3/4 to 49.6
-you would have though they would have just make the farking bearing 50.005
-smokers of losenge shaped purple vein
similarily, with the stock type 2 bearing
31.750 -its 59.4
-you would have thought they would just have make the thing 60mm
1. 1/4 inch to 60mm
-when enquiring do you make such a bearing, you are greeted with
'are you from outer space'
farging farg
-end of moan, thats without asking, can you incorporate a 4mm spacer into each cup
-moan over
-so to fit a 951 hub onto a type 2 spindle -64 - 79, you need 3/4 to 50 19.050 too 50
inner is 31.750 = 1.1/4 to 60mm
-you need 4mm spacers under each cup
-some one do it!