That clears thing up. In retrospec, I should read the titles first....sorry.
Use a 86 (only) T rear rotor, 86+T rear caliper. Everything bolts up, and typically need a small spacer (about 3mm) to center the caliper on the rotor. The later (87+) rear T rotors have a different center bore, so they technically fit but then the centering of the rotor is only done by the setscrews; not the ideal situation. The 86T rear rotor is the only one with the correct center size for the early NA hub.
Lanner
Last edited by flat; July 13th 2006 at 14:47.
|