View Single Post
  #64  
Old August 6th 2012, 18:54
owdlvr's Avatar
owdlvr owdlvr is offline
Administrator
 
Join Date: Sep 2008
Location: Canada - West Coast
Posts: 851
Hmmm..seems my post from earlier today didn't work out. QA1 has changed their part numbers in the past year. The "popular" QA1 shocks on this site are the following:

DS402 - Single Adjustable Shock
DD402- Double Adjustable Shock

They use 2.5" springs, and you'll find that the spring interferes with both the stock shock mount and the CV Joint. Best solutions (IMHO) are to make new lower shock mounts and use Motorsport CV Boots. For the motorsport Boots I used GKN part number MSJ6002 (Type1 CVs):




For the lower shock mounts, I'd go with something fully custom build/welded as opposed to modding the factory mounts. I started with modding the factory mounts and so much is cut away its arguably not strong enough or safe.


-Dave
__________________
'71 Type 1 - Rally Project
'58 Type 1 - I bought an early!?!
'73 Type 1 - Proper Germanlook project
'68 Type 1 - Interm German 'look' project
'75 Type 1 - Family Heirloom
'93 Chevy 3500 pickup - Cummins Swap

Last edited by owdlvr; August 6th 2012 at 19:01.
Reply With Quote