Slide 49- Type I IRS Chassis Prep
With 30+ years of grim and dirt, now is a good time to wire-wheel and clean the bottom of the IRS mounts
Also clean the flat section of the frame horns
This will help with test fitting the gearbox and when you need to identify areas that need to be clearance
Slide 50- Type I IRS Chassis Prep
One of the first areas that you will notice that needs to be marked for clearance is the right hand side of the nosecone/intermediate plate (looking from top of chassis)
Slide 51- Type I IRS Chassis Prep
Shown here is the clearance for the reverse gear switch
Slide 52- Type I IRS Chassis Prep
Shown is the clearance for the Clutch Cable Adapter Plate and for the TOB Fork