|
CB performance Roto-Hubs, and Varga calipers a-la Pontiac Fiero. Whole kit was reasonably priced, and I like it. Bolts right on as-is, but I had to drill for, and install longer studs and spacers for some 17x9 Cup 3's.
On the 1303 I'm building for myself, I'll use '84 944 stuff on all four corners, including the rear control arms, and some 951 spring plates.
I plan on using the stock M/C on my 1303 too, just for simplicity's sake.
Yetibone
__________________
Yetibone
'71 1302S 1.8
'73 1303S 2.3
'83 928S 4.7
|