|
Hello
thanks Jason, NO_H2O yes they are nickies from LN engineering, well the car will see some black races but not drag strips, I have other for the strip, so this one will be primarily a street car. Some spec as it's not seen, don't have older photos, sorry
scat 86mm flanged crank, forged version not billet version
carrillo 5,7" rods
Je pistons
nickies and arp's
JPmotorsport MS230heads, inlet manifolds, roller throttle bodies and 5stud ratio rockers, the power comes from the heads out of the box, no porting no secrets, juts cutting the valve seats and that's all
48X38 cbperformance titanium valves
schubeck ceramic lifters
JPmotorsport aluminum tappered pushrods
engle cam -was unlucky to this one as two months after my engine was assembled Johannes released his raptor series camshafts, probably I would have some more power with one of these
Friendly
Dimitrios
|