|
Yes down drafts are correct. I bought my dells from ebay for $140, and they are great. Theyre 36drla's and theyre LOUD! My total cost was around $250
with a manifold linkage kit. My 1641 hauls *** and I can't believe how much power it puts out. Try cb performance and ebay. My Schneider cam cost $40 and lifters/gear cost $35 from the same guy. The cam really came through too. It was beautiful. My rebuild kit cost $400 with full flow stuff. Jeg's has some good blue push lok -8an oil hose. $35 for 15feet. My 96 plate mesa cooler was $50 from some nascar dude on ebay. Heads are 40x32 stainless valve 040s ported by me from west coast core. Don't EVER use them. They sent me an 040 with cracked valve guide bosses, and a 041 that was ok. They left valve grinding and beadblasting grit on them too. Great for bearings.
My line bore was $69 by the Buggyhouse in hayward CA.
|