Quote:
Originally Posted by Wally
Hey Sandeep,
I would (and have) just get a Bosch 044 pump and be done with it.
|
x2 on the Bosch 044.
Quote:
That pump also has a 12mm (1/2 inch) inlet size, so now you also know what the feed line internal diameter has to be.
High pressure line can be 8mm. What this means in AN size, I dunno, but you will probably figure it out
I would get a high pressure filter and mount it on the pressure side with 8mm fittings, like porsche does also.
Walter
|
-6 is the closest AN size to 8mm (it's technically 3/8", which is roughly 9.5mm). I would run -6 line and not worry about it. Russell makes an aluminum fuel line that can be combined with their aluminum fuel line adapters for the easiest line-to-AN combo. No flaring tool is required. Part number 639480 for the natural finish line (also available in black, red and blue) and 639210 for an example of the fitting end (also available in swivel end as well as black/silver instead of red/blue).
034Motorsports has tested the 044 and found it does 265Lt/Hr @ 55lbs and 255Lt/Hr @ 75lbs.
Inlet is 18x1.5mm, outlet is M12.
-Dave