Since I got early alloy arms, I made some from the leftovers of my sawed-off shorter front bumpstops.
Drilled a 1/4 inch hole 1/2 inch deep, tapped it to M8 1.25, stuffed the leftover washers from some stock 944 inner rear control arm bushings into those little rubber acordians, and bolted 'em down.
I know you have later alloy arms on yours, so the pedistal isn't there. Is there some way you could adapt swingaxle bumpstops to work on yours?
__________________
Yetibone
'71 1302S 1.8
'73 1303S 2.3
'83 928S 4.7
Last edited by yetibone; May 31st 2005 at 18:29.
|