View Single Post
  #41  
Old June 28th 2005, 18:32
yetibone's Avatar
yetibone yetibone is offline
Registered User
 
Join Date: Aug 2002
Posts: 705
Quote:
Originally Posted by rip
Just to throw this out there

http://www.kartek.com/prod-windows/a...sac-601901.jpg

I was thinking of using the Saco shifter box. Cut a hole in the tunnel right behind the stock shifter big enough to fit the box through. That way you could slide the box forward bolt it up then have access to the uni joint. One behind the shifter and the other at the nose cone. The rod inside the box is support at both ends, and because the bushings are brass the shifting should be like ice even though the difference in angles.
Durn! Pretty slick. Simpler than my rig too.

I used 2 911 bushings and the little brackets they mount in, so mine takes up more space than that one does.

Wish I'd a thought of that.
__________________
Yetibone
'71 1302S 1.8
'73 1303S 2.3
'83 928S 4.7
Reply With Quote