View Single Post
  #269  
Old September 30th 2010, 08:47
evilC's Avatar
evilC evilC is offline
Registered User
 
Join Date: Jun 2008
Location: UK Where Leics is more
Posts: 644
I can't believe that you need such high spring poundages!? The video and the pictures don't give the impression of a soft suspension. Have you checked the tyre temps? If so, are they fairly even across the tread? From the temps you should be able to see if the suspension s working correctly. How much stroke do you have on the QA1s? They should be set for approx 40% up and 60% down and the springs should be coil bound (without bumpstops) before you hit the top of the stroke.
You can get poly bumpstops in all configurations and I would invest in those because relying on coil binding is not to be encouraged.
The roll does not look exaggerated but are you losing traction anywhere?
As you go higher with the spring rates you will need to valve the dampers to match. I much prefer softer springs/stiffer dampers rather than the otherway around.
Reply With Quote