|
My aim is to debut the car, fully finished, at the Volkswold Show.
The suspension setup is Porsche rear arms. Unibal setup (I believe to be an American setup that Marco Mansi sourced years ago when the project began). IRS adjuster bolts. AVO fully adjustable coilovers. Front end AVO adjustable coilovers. The beam has been modified to accept special bearings that allow the arms to move independantly a mod by Marco. The top arms have been modified to pull the top of the wheel in to give negative camber. (Trying to be like you 1303 Boys!).
There is a few other tricks in the chassis regarding bracing of the gearbox and frame horns and also the strenghtening of the front beam. All credit for the superb finish of the chassis goes to Mark at Flatlands.
Yes, I am up for Spa 2012.
|