Thanks!
The last couple of days haven't been as productive as I had hoped they would be. A combination of really cold temperatures and other jobs meant less time in the garage then I had hoped. I did manage to finish all the stock dash switches, which turned out to be more challenging then I expected. Note to self, next time I stuff a bazillion wires in behind the dash...put the fresh-air knobs in
FIRST
Then, following that I figured I better test to see if the gas-heater would actually fit the car. This is the first time I've had a chance to see it was even remotely close! Thank goodness it appears that everything is going to work just fine.
...and I started on the fuel pump plumbing. Unfortunately one of the T-fittings didn't come in, and I mucked one of the straight hose ends. No worries, the shop will have replacements in tomorrow and I can finish this up. You wouldn't believe how hard it is to make those tiny short fuel lines! I thought -8 lines were fun to make, but the smaller -4 lines are a real chore. I'm not 100% the configuration I've chosen will work (since only one pump will be powered at a time)...worst case I'll need to put a one-way valve in-line.
On the bad news front, I'm having a really tough time sorting out how I'm going to deal with running the wiring harness beside/under/around the driver's seat. When I got frustrated with that I moved on to the rear portion, and quickly determined that I'm either a) going to need to buy a harness or b) build one from scratch. The engine & taillight portion of my harness is just
brutal. I've got a few days off the bug planned due to work commitments, so hopefully I can come back on Saturday with a fresh perspective and attitude!
-Dave