Are 914 gauges same connections as a IV?

[kra710]

Ok as you know I have a 1977 transporter with a 2.0 L type IV, I was looking into installing all new guages and fabbing a plate out of aluminum. I like the 914 gauges but I am curious, Will they work with no modification as far as wiring is concerned? I guess this really will probably only apply to the fuel and speedo gauge, but since so may people have IV power Im sure you guys would know.

[NO_H2O]

My fuel gage is off, runs empty between 1/2 and 1/4. I fill up at 1/2. I did see someone replace the indicator inside the Porsche case with a VW indicator using some epoxy.

[kra710]

but as far as the other connections its bolt on? If thats the case I can just make a bezel and install them?

[boygenius]

Originally Posted by NO_H2O

My fuel gage is off, runs empty between 1/2 and 1/4. I fill up at 1/2. I did see someone replace the indicator inside the Porsche case with a VW indicator using some epoxy.

Check this thread for information.

http://www.germanlook.com/Forums/showthread.php?t=3716