|
|
|
|
#1
March 30th 2007, 16:25
|
|||
|
|||
|
my new motor
 Its the best out of the 2 motors i have. It has a Universal Type 1-3 case, 040 heads, stock rockers, stock cam, only has less thean 7k miles, the heads are super clean like they just came off the shelf.I got a standard header, glasspack (its leaning on the wall) bosch 009, bosch blue coil, 34 pic carb.Basically its stock but its my first motor.  The other I may use the longblock section as a core to get a basic 1776-1914 if possible. 
|
|
#2
March 30th 2007, 20:31
|
||||
|
||||
|
Hey, thats a good starting point, and it gets you on the road.
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans  1962 SC 1776cc SP 944NA brakes, 993 wheels VKG
|
|
#4
June 15th 2007, 13:25
|
|||
|
|||
|
After its on the road which should be either july or august (one of the 2) and after I give it the stance that I want I was thinking of going with bolt on power since i have a c/w crank already and it was rebuilt couple years ago.How would a 1600cc react to 1.4:1 forged rockers (with shortened pushrods), merged 1.5" header w/ hideout muffler, big valve heads with 40x35mm valves (since everyone says its all in the heads, where the power is at) dual 40IDF Webers, upgrade from a bocsh screamer kit to whatever, and use stock cam, and the other internals.Reason for this is Im on a budget so, bolt on power would be best and plus I wont need to tear the motor fully down for this since it will be my daily driver.
Last edited by Veedub; June 15th 2007 at 17:55.
|
|
#5
June 15th 2007, 17:56
|
|||
|
|||
|
Im thinking of upgrading my carberators, and was wondering what would be best for a 1600cc.Everything is stock except header and muffler.Any sugestions guys?I was thinking maybe 40IDF's or Kadron 44's, what you guys think?
Last edited by Veedub; August 11th 2007 at 00:24.
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
