|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Fiberglass 68- front fenders, Lasercut parts of the shelve, CNC made brake parts etc.
I have some stuff to sale, feel free to ask by private message or email: alexstorskrubb@jippii.fi
Dont ask on this topic, because i dont watch it every day. If the price is too high, you can give me a nice offer ;D Lasercut parts available right away: -2 x 12-1 134x6mm Trigger wheel with sensorbracket for honeywell 1gt101dc sensor -2 x VW sign 210x4mm - 21 each or 35 both -2 x VW sign 68x4mm - 12 each or 20 both -1 x transaxle midmount kit with flange and two bended ears - 40 -1 x 200mm flywheel puller with M16 nut at center - 35 ----------------------------------------------------------------------------------------------------------------------------------------- Porsche PCD hats for wilwood rotors -Two for front which have 12x7" pcd for 1/4 UNF bolts. 10.9 bolts come with these. -Two for rear which have 8x7,62" pcd for 5/16 UNF bolts. 10.9 bolts come with these. Made from 6082-T6 aluminum and anodized to black. There is a lot of rotors available for these rotors: http://www.wilwood.com/Rotors/RotorList1.aspx 70 each or offer --------------------------------------------------------------------------------------------------------------------------------------- Kerscher fiberglass front fenders for beetle 68-, 3cm inner widened, NEW. Made in Germany, all holes drilled, steel headlight bucker, best QUALITY ever! At the picture is outer widened. New at kerscher 399 290 or best offer ------------------------------------------------------------------------------------------------------------------------------------------- Boxster brake caliper adapters from Kerscher 4-piston Porsche brake kit. http://www.kerscher-tuning.de/kaefer...remsanlagen+VA Fits with 300-320x20-24mm rotors. Originally used with 278x20mm rotor at the kit and also brake caliper M10 holes at spindle were moved inwards 22mm by Kerschers installation manual. 60e ---------------------------------------------------------------------------------------------------------------------------------- Aluminum t IDF/DRLA velocity stacks 4 x stacks, with up to 46mm carbs. 30e --------------------------------------------------------------------------------------------- |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|