Help with 944 Rear setup

[Lurv]

I HAVE DONE A SEARCH!!! but didn't find the info...

I need to know what parts you need to do a bolt on to a 1303s.

as Im going to by it over the net I realy want a parts list pref with part #. what do I keep from the STD setup, what do I need to get from the porsche dealer?

thanks,

[QUOTE=Lurv]I HAVE DONE A SEARCH!!! but didn't find the info...[QUOTE]

The info is there, over and over again

[danielzink]

I went up to the top of this page - to the search - and typed in

1303 944 brakes

just like that........and got 3 pages of hits.

Just as an experiment.

Dan

[Lurv]

I got alot of post too but none that contain a parts list... I got alot of useful info but not what to order (in my case) from the porsche dealer...


most post are about front brakes and are answerd with "do a search"...

Here are the posts, from a search in the brakes forum, that you should read. There is lots of information and I think the reason that you haven't found the exact list is because there are several ways to do this conversion and you'll have to make your personal choice.

http://www.germanlook.com/Forums/showthread.php?t=1896
http://www.germanlook.com/Forums/showthread.php?t=1804
http://www.germanlook.com/Forums/showthread.php?t=3855
http://www.germanlook.com/Forums/showthread.php?t=2881
http://www.germanlook.com/Forums/showthread.php?t=2203
http://www.germanlook.com/Forums/showthread.php?t=1703

[Pillow]

If this is just for the rear it is so easy it will make you cry.

Get 944 rear brakes from swing plate out (you need the caliper mounting bracket outward). Install on IRS arm. Done.

http://www.pelicanparts.com/944/944_...3-85/Pic69.jpg

The only issue that should arrise is how to deal with the emergency brake cables. Since I have not done a Super you have to search on that one.

FWIW you should buy a cheap POS Haynes 944 manual to get an odea of how the brake system works. They are cheap... In all ways.

It is easier than you think. Do it. Do it. Do it.