Knock sensor

[Bad bug]

Hi Guy's
Is it possible to use a knock sensor from an modern day car on a t4 engine.

[Shadowbug]

I've heard of using a knock sensor ignition system from a 1.8L wcvw engine on a type 4. in theory should work great since its could be converted to standalone easily, in practice probably would be trouble, since the timing is not setup for the type 4.

theoretically all you'd need is the dizzy, box, coil and wiring from a '86-89 GLI or GTI probably need to have the dizzy turned down to slip into the type 4 block. and find a suitable place to mount the knock sensor.

[Wally]

Originally Posted by Bad bug

Hi Guy's
Is it possible to use a knock sensor from an modern day car on a t4 engine.

I would say no. Especially not from any watercooled cars. Not even from other aircooled cars as the 993 models.
The software to filter out all other noises is very engine specific and tuning of that software very critical as you might imagine.

The only device that can handle an UnderHeadCammed aircooled engine would be the Safeguard, sold by aircooled.net IIRC, but BadBug, you drive that dragrace yellow bug with the huge (2,8 ltr?) oxyboxer don't you? Surely, you're aware of all this...(?)

Best regards,
Walter

[Bad bug]

No Wally you have the wrong Bad bug. I live in Jamaica.

[yetibone]

Knock retard ignition control is not a stand alone system, but part of a total engine management system, like Bosch Motronic.

As Walter pointed out, the knock retard parameters would have to be taylor-made for a ACVW. Since ACVWs needs so much less total advance compared to many cars made today, there's no practical application to retrofit such a system from.

[Wally]

Hi Yetbone,
This does look like a stand-alone system:
http://www.aircooled.net/new-bin/vie...GN0007&cartid=
Do you know it?
Greetings,
Walter

[yetibone]

Yes that is. I should reiterate...

Using one from another vehicle, I.E. VW Golf or Jetta, wouldn't work as THOSE are not stand alone systems.