911 shroud

[Bad bug]

Could someone tell me if their is a 911 shroud that works well without cooling isues.

[justdubbin]

I think you might find all of your answers HERE

[Wally]

Originally Posted by Bad bug

Could someone tell me if their is a 911 shroud that works well without cooling isues.

Define cooling issues...

[zen]

i have to agree with Wally on this one. cooling issues can be defined many ways. there are many 911 shouds that cool sufficiently. and some that have what i would consider issues. from research i have seen and from first hand expereince having run both shrouds on the same engine, the DTM will out perform most 911 systems which results in more power. just a trade-off in looks.

[Bad bug]

Zen what i mean is unevenly cooled pistons. I do hope jake would finish the 911 system he bought from joe. Zen in your estimation which one of the systems cool the best. I bought my engine with the fat system.

[Sandeep]

For a stockish engine with the FAT shroud, check this out.

Sandeep

[Bad bug]

Do you have any intention to put directional veins in the shroud.+++++++++++++++++++++++++++++++++++++++++++ +++++++++++

[zen]

Originally Posted by Bad bug

Zen what i mean is unevenly cooled pistons. I do hope jake would finish the 911 system he bought from joe. Zen in your estimation which one of the systems cool the best. I bought my engine with the fat system.

sandeep has some good data on it. i can only go on what i saw on my Westach dual CHT (on 1 and 3). i didn't have many miles on the engine before loosing a lifter (ended up being identified as a bad batch of lifters after 7+engines went from the batch), but typically saw a 30-50 degree difference.

i am running a DTM now and VERY happy with the results. always dead on and have only bumped 275 one time.

[Massive Type IV]

Zen's engine is a powerhouse to boot!

If you want looks the Carbon Fiber DTM blows the doors off a generic looking 911 arrangement!