opinions anybody?

[Rob]

The rims are Enkei RP02 15x6.5 rims with Kumho 712 Ecsta Supra 205/50ZR15 Tires.

It was a major PITA getting it all fitted, but that was mostly my own fault since I didn't research things enough.

Of course I had to change the bolt pattern, so I initially ordered blank disks for the front. The machine shop butchered them drilling the holes, so after further investigation I found rotors with the correct pattern.
Then I need studs that were long enough...... then I needed tuner lugnuts that would fit the holes (you can't fit a socket around them).
When I finally had them mounted, I had virtually no steering left since the rims hit the frame on the inside, so then I had to get spacers....

So, I'd say you are on the right track by investigating things before you buy .

You'll need to get new drums for the new boltpattern, so you might as well fork out the cash and get the disks for at least the front.

Also look at the Rota SubZero.... I always loved those rims.

I also really like the ones you posted with the black spokes... mostly because they give you a nice 'lip'.

Hope this helps.

Rob.