|
just a thought... eventually i was considering upgrading to some wilwood 4 piston calipers front and rear. i could do this sooner rather than later if i could use a bug master cylinder with them successfully, as it would save buying the uprated CSP master cylinder and fitting kit.
the calipers i want have the choice between piston diameters of 1.00" (25.4mm), 1.25" (31.8mm) or 1.38" (35.1mm) for the fronts, and the rear handbrake caliper has 1.00" (25.4mm) pistons.
if i used a stock bug 19/19 master cylinder, to keep the bias right, would you suggest something like the 1.25 for the fronts, and 1.00s for the rear, or the same front and rear then make adjustments using a regulator valve?
mabbo
Last edited by mabbo; August 26th 2008 at 06:10.
Reason: added piston sizes in mm's
|
August 26th 2008, 06:05
Threaded Mode