#1
|
||||
|
||||
A few things
Hey all,
Well bad news, my motor has to come apart Basically what happened was i started hearing a weird noise coming from the clutch area. After pulling the motor to investigate, turns out the pilot bearing is effed. But that's not all i found! I take the gland nut out, only to find my flywheel really loose on the dowels.... So i pull it off, and the dowels fall out of the crank! I look at the dowels and they have been peened all over their circumference. (It's a dirty trick to make the dowel a few thou bigger to make them a nice press fit in the hole) The rest of the crank is beauty, real nice piece. But because of some lazy goon, who reamed the crank a thou or to over, they had to make the dowels a little bigger to fit! Now the dowel holes are all ovaled, and i'll need to put in a new crank! Not a happy camper.... On a related note, does someone have a decent stock peashooter exhaust? (stocker is going back in!) Alex
__________________
1970 Bug 2110cc. ???Whp, ???Ft/Lbs |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|