|
Hi Markus! You guys should see the car in person,it´s very well done! Did you bleed the oil lines and oil cooler properly Markus? Also check your oil pressure gauge or swap it with a gauge that you know works.
Another possible reason could be that your pick up tube inside the case isn´t properly fit or too high above the sump.The pick up tube may not be able to suck enough oil if it is not properly installed.That would be a problem because you may have to open the case again.I hope that´s not the reason and it is something simple..
Last edited by 70Turbobug; June 15th 2010 at 05:48.
|
June 14th 2010, 05:19
Threaded Mode