Sorry, i did gvie wrong pricenumbers for JPM heads..
TP's heads fit for type 1 engines also, allthough they are only for engines with wbx headstud spacing. Maybe he can produce them with type 1 stud spacing also.
But wbx stud spacing equals more cc
TP's heads may cool even little better, since they have trhoughholes and full exhaust fins.
TP's heads are not available as bolt on, but they have also a lot of potential. His bare heads cost 1800€ pair, i calculated that valves and rest of stuff including JPM springs and ti retainers cost about 730€ from CSP.
Quote:
Originally Posted by 70Turbobug
Thorsten Pieperīs heads are awesome! At the moment there are only a couple of pairs out there and are being tested.Maybe he will produce a few more.However his heads are for the wbx converted to air.JPM probably has the best type 1 heads on the market at the moment,the quality is exceptional and they have enormous potential.They are expensive,but think about buying the other heads available and having them ported and the JPM heads are 100% streetable unlike the others.
|
March 11th 2013, 03:52
Threaded Mode