![]() |
#8
|
||||
|
||||
I spent a lot of time researching the different options and in doing so I became a gauge lover. I looked into VDO, Autometer, Westach, SPA, Stack, and Porsche 914. The 914 stuff beat out the other options because:
* Biggest tach diameter available * OEM/GL look -- clean, simple cluster * All gauges from same maker Then I found the Quad guage by NHSpeedometer. I was hooked on the integration of fuel/volt/OP/OT with idiot lights. The blue LED/white face combo was the closer. I just had to. Here's the bill: Speedo rebuild and calibrated for wheel size - 130 Speedo trip reset cable - 45 Tach rebuild with board for optical distributor - 135 Quad calibrated to OP/OT senders - 500 LED lighting/white faces - 300 Custom screen print art (VW logo & idiot labels) - 75 Bezels with glass faces - 45 VDO OP/OT senders - 40 Total nut - 1270 It still sounds crazy to me that I spent that much, but I'll forget about it soon and enjoy the gauges for a long time. This is a special project for me, so I'm emphasizing a high-end driver interface (gauges, steering wheel, seats, shifter). NO_H20 -- I don't know the blue LED's used. They look sweet though. The tech said they were soldered to the stock bulb holders. I imagine its a trick install on the inside. He said the blue VW logo gets ghosted when the lights are on and it's dark. I'll try to get a picture when I install them. For the custom panel, I'm going with a clear anodized, lightly bead blasted aluminum for a matte silver finish. The dash is smoothed and painted Porsche Lapis Blue. Thanks for the :agree: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|