|
|
|
|
#1
March 2nd 2005, 16:22
|
||||
|
||||
|
So yesterdayevening I had some time, so I have worked on my cage.
The first piece of the cross in the cage is ready and is till thursday tacked in.  Under http://www.keversite.nl/fotoalbum/fo...2005211031.jpg Above http://www.keversite.nl/fotoalbum/fo...2005211057.jpg The other half of the cross is made almost on the right size. Here a little pre-look at it.  Greetings Wiebrand 
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!! 
|
|
#2
March 17th 2005, 19:43
|
||||
|
||||
|
So finally I had some time to get on with the cage again.
At first an brither pic of the cross in the cage (not totally ready yet). http://www.keversite.nl/fotoalbum/fo...2005230215.jpg And anbetter pic of the welding on the back wheelarces. http://www.keversite.nl/fotoalbum/fo...2005230528.jpg At first I had maked two other holes in the dashboardplate so that the tubes from the struts can go to the cage. Pic from the inside (driversside).  Pic from trunk (driverside) http://www.keversite.nl/fotoalbum/fo...2005230812.jpg Also we had bendend 2 tubes that will go in front of the doors from the a- to the b-pillar.  After that we welded brackets on the tube at the a-pillar. So that the tube from the strut can be mounted to the cage. Driversside http://www.keversite.nl/fotoalbum/fo...2005231044.jpg Passengerside http://www.keversite.nl/fotoalbum/fo...2005231132.jpg
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!!
|
|
#3
March 17th 2005, 19:43
|
||||
|
||||
|
There's also an bracket welded tot the long tube (from the strut tot the cage) so that the short tube can be mounted from the strut to the cage.
 An detailpic of the bracket welded on the long tube. http://www.keversite.nl/fotoalbum/fo...2005231344.jpg And FINALLY the front of the cage is READY. It was about time!!! Seen from the trunk.  From the interior.  See ya next time Wiebrand
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!!
|
|
#4
March 17th 2005, 22:16
|
|||
|
|||
|
It looks solid there man...nice job! :agree:
__________________
There is no cure for our disease '69 standard ( under the knife) '72 1302 GL ( under the knife and on hold) VolkSport Kfer Gruppe www.VolkSport.net
|
|
#6
March 18th 2005, 01:47
|
||||
|
||||
|
wow
__________________
|
|
#7
April 7th 2005, 17:49
|
||||
|
||||
|
WAKE UP, WAKE UP:
It's time for another update. Last week I've begun starting to bend the last tubes for the cage. http://www.keversite.nl/fotoalbum/fo...2005001341.jpg And that gives this final result.  It need to be shortend on the right size and then also this one can be welded in. Also is the cross welded in. http://www.keversite.nl/fotoalbum/fo...2005001514.jpg And that gives this nice picture (if I may say).  Here some detailpics of the welding http://www.keversite.nl/fotoalbum/fo...2005001624.jpg http://www.keversite.nl/fotoalbum/fo...2005001729.jpg Grt. Wiebrand
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!!
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
