|
|
#2
June 5th 2005, 22:17
|
|||
|
|||
|
No, they won't fit...With an IRS car it takes a bit of clearacing to fit a 7" wheel...8" might be possible with the right offset, but things would be very close in the end if possible to begin with.
ET23.3 and ET10.6 would require 1-1/4" wider fenders...ET10.6 would fill them out excellently with a stock trackwidth too. Things that do fit a 'stock' car: 15x4.5 ET42 (rare) 14x5.5 ET46 (common) 15x5.5 ET42 (rare) 15x7 ET49 (ultra-rare) 15x6 ET36 (common) 16x6 ET36 (common) Last edited by KaferChris; June 5th 2005 at 22:23. 
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode