Resources for GL work in GTA

[germansupply]

Greetings,

Sandeep thought it might be helpful for me to introduce myself to your group. My name is Scott Lyons and I run germansupply.com. We are an online and "bricks & mortar" VW aircooled specialist located in downtown Toronto. Since we specialize in bay window buses, we have lots of type 4 engine parts in stock. Also type 1 engine bits as well. We do engine building in house. I personally do all the engine assembly on every engine we build. We have a service facility also where I repair and restore only air-cooled VW's.

Sandeep is rebuilding or at least refreshing his engine and I was able to supply him with some quality engine internals. If anyone needs parts, please send me an email or call the telephone number on our contact page.

[gonebuggy]

Me: for all of you custom, machining needs. Prototyping and small production work. I can open up your cylinder heads/flycut, open up the bores in cases. My rates are about HALF of what you'd expect elsewhere.....

Drop me a line!

Alex

[petevw]

Alex made a couple pieces for me, and they turned out great.


Local Anodizing shop:

Brimac Anodizing
542 Kipling Avenue,
Toronto, Ontario
M8Z 5E3
TELEPHONE: (416) 255-4411
FAX: (416) 255-3145

Was very happy with their anodizing work. Great service and price.



I'm looking for a Powdercoater......... Anyone know of any?


Pete

[gonebuggy]

Thanks for the kind words Pete!

Try these guys for Powdercoating:

http://www.yellowpages.ca/bus/Ontari...&le=c53523c1ba

I got all my engine tin done by them a few years ago, very good product with fast turn around and good rates.

Alex

[germansupply]

alex has done some machining for us also. fair price and fast turnaround.

as for brimac anodizing, i used to manufacture furniture, this is going back into the late 80's, and we used brimac then. their work was perfect, and it's good to see they're still in business.

[petevw]

Need to strip these crotch cooler flaps.

Have you guys used any media blasters around here? Wouldn't sandblasting pit the crap out of them?

Pete

[gonebuggy]

Pete,

Glass bead at 40psi. My cabinet is currently not setup/opperational

Fishburn and Proctor on Steeles are your guys to see.

Alex

[petevw]

Thanks Alex,

Looked them up:

Fishburn Proctor Sandblasting & Painting

15479 Steeles Av E Hornby, L0P 1E0

(905) 878-1843

[gonebuggy]

That's them!