GermanLook Forums  

Go Back   GermanLook Forums > Technical Section > Engines

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #5  
Old September 7th 2007, 20:58
gonebuggy's Avatar
gonebuggy gonebuggy is offline
Registered User
 
Join Date: Apr 2007
Location: Canada
Posts: 308
Alright, heres what you should check:

You've checked to make sure that when you look down the carbs and you pump the linkage you see fuel squirting down?

Checked the plug by grounding it while turning the car over? car turns over, lights work?


So no spark; checked wires? Run a voltmeter across the coil when turned on? all other wires are connected properly? next: check the cap for cracks, checked the contacts inside it? check the little sprung carbon button that touched agaist the center of the rotor? have you checked to see if the points were loose? do they open and close when you turn the motor? Checked the condenser and it's connection, both to the points, and to the coil? has the distributer moved? when open the "number one line" should be roughly the 5 o'clock position.

It may be entirely possible that somone has wired in another fuse in or near the engine bay. Follow all wires from the engine.

If you've done all that, then i'll have to think about it some more lol

best of luck bro,

Alex
__________________
1970 Bug
2110cc. ???Whp, ???Ft/Lbs
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:51.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved