|
|
#11
May 3rd 2009, 21:35
|
||||
|
||||
|
Main wiring harness is now installed. There is only 1 guy that makes these pre-52 harnesses in his garage. He starts making them only when he gets a few orders. Harness is PVC wire, soldered, and cloth braided. Same as OEM. About 2yrs in the making, that was installed in January '09.
Pulled nylon twine throughout body to use as pullcords.      I included some tricks of my own. Ceramic resistors to drop to 6V for the semaphores, that were found after looking in a few electronic junkyards around town. Rear tailights are dual circuit for running and brake lights. Need to terminate the rear lights, and headlights when installed. Pete
__________________
'72 super '65 bus '52 split Last edited by petevw; May 3rd 2009 at 21:42. 
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode