Porsche O.E. Wheel Discussion

[vdubfund]

Heres my 1964 short SA bug
Test fit of 16 x7 fuchs , fat 205/55/16 rubber, and Porsche 944 hubs. FITS!!! just , Big of rubbing . A non euro tire would probably help too. Not as wide.

[KaferChris]

987 Boxsters 2.7L wheels 17x8 & 6.5
235/45 & 195/45

Stock late IRS rear, 1-1/4" CCC fenders, 924S brakes w/factory ~19mm spacers

Stock 'Ghia beam with adjusters on front, stock fenders, ~17mm spacers

[KaferChris]

Originally Posted by KaferChris

987 Boxsters 2.7L wheels 17x8 & 6.5
235/45 & 195/45

I'm now looking into these for my girl's 1303 that has stock fenders all the way around - anyone try 17x8 (ET40) with 215/40's on back? Lowered one inner spline.

[flat]

Here's a 56 bus I did last summer. 7 and 8" 16 dials. 4" beam with stock micartas turned down for scratch built beam, 4.85" non-flipped hybrid dropped spindles, boxster brakes, straight axle (short) with Wagenswest offset plates. Rear required 5/8 " spacers.

[flat]

Here's a 59 bug I did last summer. I built a 4" narrowed LP beam (with shocks), Porsche 944NA disks all around etc, dropped drum spindles, short axle, 15x7 et52 wheels, stock 944 22mm rear spacers with studs.

[flat]

Porsche wheels the easy way: 1" adapters. Stock suspension on 14x5.5s