|
|
|
|
#1
May 11th 2013, 15:58
|
|||
|
|||
|
Today I checked the clearance of the rods with my own wheels.
The track wheels (fuch's) fit perfect.  The street wheels have clearance but have a bad ET (to far out) 
__________________
If some is good and more is better, then too much should be just about right! 
|
|
#2
May 15th 2013, 08:24
|
|||
|
|||
|
Now the front is (almost) ready, I started on the (new) gearbox mount. (the enginelid has to be closed)
   I think I have to move the gearbox foreward. Paul.
__________________
If some is good and more is better, then too much should be just about right!
|
|
#3
May 18th 2013, 07:13
|
|||
|
|||
|
Due to the fact that I have to use X-joints (don't know what they're called) in the steering, the steering column had to have an extra bearing. So I made a bracket, shortend the column and mounted the bearing. I am pretty pleased with it.
  Paul.
__________________
If some is good and more is better, then too much should be just about right!
|
 |
| Currently Active Users Viewing This Thread: 2 (0 members and 2 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
