My other 1303 GL

[Steve C]

Hi

Tomei pon cams arrived today, thanks to jessestreeter.com

So now that I have everything I started looking deeper into hooking up the ECU to see the flex fuel sensor.

The plug n play Autronic SM4 is showing its age and its not easily configurable to run a flex fuel sensor, I need to fit missing pins into the stock ECU plugs.

So Haltech do a plug n play but it needs an upgrades MAP sensor as the one fitted only goes to 22 psi, its $1975 + $129 for a 30 psi MAP sensor.

Adaptronic do a e1280s stand alone unit for $1990 that has some better features than both the Haltech and Autronic but it needs to be wired in.

My tuner prefers Adaptronic http://www.adaptronic.com.au/product/e1280s/

So I will need to do some thinking

Steve

[Steve C]

Hi

I've been rethinking the water line layout for my ice box & intercooler. I only use the ice box for drag racing and tuning on the dyno. I was sending the ice water to the intercooler radiator at the front of the car after it had been through the intercooler which was was picking up more heat. With this new arrangement I can recirculate the chilled water in a closed loop which I think should make it last longer

Steve