Dry sump tank position vrs oil line sizes

[Wally]

I think I used -16 (dash-16) AN lines as feed to engine from my DS tank in the nose of the car. Return line to DS tank and oil cooler is one or two steps smaller (simple 12/13mm metric lines).
Also with TP pump. Hope that helps.

[brent]

Originally Posted by Wally

I think I used -16 (dash-16) AN lines as feed to engine from my DS tank in the nose of the car. Return line to DS tank and oil cooler is one or two steps smaller (simple 12/13mm metric lines).
Also with TP pump. Hope that helps.

Thanks wally, yes that helps and i think that would work well, I will leave the -12 lines every where else, but just the tank feed to pump line i will increase to -16. Actually I just today fitted the pump into me arpm race case, I froze the pump, heated the case and it was still tight as it should be.

[effvee]

Hi, what size/kind of pump will supply the oil and pressure?

[brent]

Hi, its a Thorsten Piper German build dry sump pump, a very nice brand new pump. This will replace my old bug pac or Cb pump. The ratios between pump and scavange are different and a big improvement i understand.

[effvee]

Originally Posted by brent

Hi, its a Thorsten Piper German build dry sump pump, a very nice brand new pump. This will replace my old bug pac or Cb pump. The ratios between pump and scavange are different and a big improvement i understand.

Any pics? I plan to use the pauter pump.

[exportbug]

Originally Posted by effvee

Any pics? I plan to use the pauter pump.

For more informations.....
link: www.tp-technologie.de

[effvee]

Originally Posted by exportbug

For more informations.....
link: www.tp-technologie.de

Thank you.