willwood ? pedal assembly

[ricola]

If I was to do it again I wouldn't bother, just convert to hydraulic clutch and use a 21mm dual circuit master with rear bias valve if required. I've spent a small fortune on different master cylinders getting it right!

[graham]

Originally Posted by ricola

If I was to do it again I wouldn't bother, just convert to hydraulic clutch and use a 21mm dual circuit master with rear bias valve if required. I've spent a small fortune on different master cylinders getting it right!

I've just remembered you sent me a link on this before Rich I had forgotten all about it.

Here's the link for anyone else considering pedal assembly mods.

http://forums.aussieveedubbers.com/v...d=78092&page=3