#16
|
|||
|
|||
Quote:
Code:
http://lh6.ggpht.com/_La1eAqcYaPA/SQ3Iq6_FdwI/AAAAAAAAADg/KTac2RGyzrs/s640/IMG_7575.JPG |
#17
|
||||
|
||||
Does the speedo cable from a Beetle/Type 3 just fit straight into the 924/944 speeedometer?
__________________
Blitzem with Type 4 power |
#18
|
|||
|
|||
Quote:
Rob |
#19
|
||||
|
||||
Quote:
The square drive does but you will have to come up with some other way to retain it as the collar doesn't fit... Thinking about it, maybe a 924 cable would fit?
__________________
http://www.ricola.co.uk |
#20
|
|||
|
|||
I know that a 924 has the same type of end on the wheel side. square/through the spindle/etc and it should be about the right length.
Rob |
#21
|
||||
|
||||
Okay sweet!! Thanks guys! My Type 3 will be getting a 924/944 speedometer in the centre hole...
Kuna, your dash is looking very cool!
__________________
Blitzem with Type 4 power |
#22
|
||||
|
||||
The Type 3s also have a tube style sender. I wonder if the 924/944 fuel gauge would be compatible??
__________________
Blitzem with Type 4 power |
#23
|
||||
|
||||
1303 speedo cable works fine with 924 speedo (pre 1980, I have 1977 gauges) the problem is that gear ratio is different than beetles, 60km/h on the speedo is about 50km/h, I have checked that with drill on cerain rpm
|
#24
|
||||
|
||||
It's a direct drive from the front wheel for both cars so it all depends on what size tyres you run...
__________________
http://www.ricola.co.uk |
#25
|
||||
|
||||
I have a 924 speedo that I'm fitting to my fastback and the cable fits and screws on perfectly
__________________
Blitzem with Type 4 power |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|