Rear IRS Suspension Question

[Bug@5speed(US)]

EvilC,

Do you have a pic of the pvc thick washer you made, I had a similiar idea to also do this to push out the spring plates just slightly to clear the chassis.

Would be curious to see how yours came out. Do you still have use of the chassis so that it serves as the lower stop for the plates, or are they pushed out beyond that..

Any info appreciated.
VR
Alex

[evilC]

Originally Posted by Bug@5speed(US)

EvilC,

Do you have a pic of the pvc thick washer you made, I had a similiar idea to also do this to push out the spring plates just slightly to clear the chassis.

Would be curious to see how yours came out. Do you still have use of the chassis so that it serves as the lower stop for the plates, or are they pushed out beyond that..

Any info appreciated.
VR
Alex

Alex, Have a look at my avatar - thats the finished product if you can blow it up big enough (I'm useless at posting piccys). The Pvc washers were the same inner diameter as the spring plate tube and the outer diameter was the same as the alloy bush housing so that they effectively together made up the difference in width between the beetle bush and the 944 bush, which IIRC is 10mm.
The chassis stop plate still functions (just) with the inner washer only in place, in fact the piccy again shows the spring plate sitting on the chassis.

evilC

[Bug@5speed(US)]

Xellex,

You can also purshase the brackets from pelicanparts.com. if you don't have access to a porsche.

VR
Alex

[Steve C]

Hi

The outer clamp on the 944 rear stabiliser bar is the same as a 71-73 1302/1303 front stabiliser clamp, another example of VW & Porsche sharing the parts bin.

I saw these Kersher ones somewhere on the net, they look kind of low but it could be the angle of the camera.

Steve

[Xellex]

I made mine out of the original Porsche brackets, and some extra metal. I copied the Kerscher design. I used the porsche clamp & bushing, because the inner diameter of the bushing is different (smaller) compared to the beetle one.


What do you guys think would happen if you don't use a spacer washer at the torsion plate bushings, and let those 2 adjuser nuts rub on the inside of the chassis? I'm gonna try and see... I don't think there's any danger in that, only maybe some squeaking sounds. Could we grind some small portion of the chassis, in that area maybe?

[evilC]

Originally Posted by Xellex

.......................
What do you guys think would happen if you don't use a spacer washer at the torsion plate bushings, and let those 2 adjuser nuts rub on the inside of the chassis? I'm gonna try and see... I don't think there's any danger in that, only maybe some squeaking sounds. Could we grind some small portion of the chassis, in that area maybe?

They didn't rub on mine - the edge of the adjuster heads dug into the forged damper tower and I could see that if I left it something would give, the bolt head and/or the damper tower would be damaged. As I said previously, the spacer is 5mm and the bolt head clearance is 1mm, hence there is a 4mm interference.

evilC

[jmd]

fastBacker,
I have an extra set of 86' 944T Alu arms if your interested as well as a full set of Cross Drilled Rotors available that are NIB... Asking $350.00 for the package... Let me know if this will help you in your build.
oh, im in the states.