GermanLook Forums  

Go Back   GermanLook Forums > Technical Section > Wheels

Reply
 
Thread Tools Display Modes
  #1  
Old September 7th 2011, 05:04
-Alex- -Alex- is offline
Registered User
 
Join Date: Oct 2009
Location: Finland
Posts: 278
How wide actually fits to back and how much there is room for backspacing from stock setup? 6cm wider rear fenders, early 944 arms, which widens about 43mm per side with brakes?

Original wheel 4,5 x 15 et34

Kerscher wheel 9,5 x 18 et67 or 73, depends if wheel has flat or high center.

http://www.1010tires.com/WheelOffsetCalculator.asp

67-43 = 24mm

Inner clearance is 53mm less than stock with this setup, probably doesnt fit. Spacers or wheel with less et perhaps? et54 or 60 is next smaller et.






But again, base point for these measurements could be perhaps typical empi 8-spoke which is 5,5x15 et 30 and it fits under stock rear fenders easily. At this calculation, 9,5" et67wheel is still used.


Last edited by -Alex-; September 7th 2011 at 05:56.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 16:48.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved